Tuesday 10 January 2017

Describing The Barn

After my last post about starting work on the model of the old barn a few people got in touch to ask about how I scribe stonework into the styrene?

(And a few others wanted to question my sanity...)

One of the questions was about what kind of tool I used.

I don't know exactly what it's called but this picture may help.


I've read some suggestions that it's some kind of dental tool - which rather puts me off ever going back to the dentist, if you ask me - but all I know is that I picked it up on a tool stand at an exhibition more years ago than I can remember.

I use the tool a the left hand end - the sort of pointy-spoon-shaped piece.

I hold the shaft very close to the bottom in the same way as you would a pen. The point is very sharp and it doesn't that that much pressure and a couple of passes to gouge out a convincing amount of styrene.


There are different types of plasticard, I know, but the stuff I use is probably a lot softer than you might think it is if you've never seen this done before.

The effect, I think, is rather good, especially at a distance.


The only problem is that the surface is much too smooth very rough or lumpy stones, but it's quite acceptable (to me anyway) for walls built out of Welsh slate blocks which can be quite flat.

Besides which, once it's six feet away from the viewer, as this will be, who is ever really going to notice?

1 comment:

  1. Many thanks for the "how to."
    I have one of those dentists tools which I have used for applying filler so a quick polish to sharpen it up and I'll give it a go tonight .
    Mark.

    ReplyDelete