Tuesday 13 December 2016

Meals On Wheels

The bits I needed for the bogies for 125 arrived in the post and half an hour with a soldering iron, a set of broaches and some superglue later the new Service Car is on wheels.


The bogies and the door unit will almost certainly require some adaptation in order to get around the curves on Dduallt - or at least at the 'bottom end' where there is the cut in on the frame.


It may be a while before this can be done because the layout has been taken down while Himself works on the fences on Bron Hebog.

At least now, though, I can fit the truss rods and all the gubbins beneath the carriage and be sure they don't hang down too low.

No comments:

Post a Comment